पावर सप्लाई एक ऐसा इलेक्ट्रॉनिक डिवाइस होता है जो बिजली को उस रूप में बदलता है जिसमें आपके कंप्यूटर या किसी भी इलेक्ट्रॉनिक डिवाइस को जरूरत होती है।

Power Supply का Function
- AC से DC Conversion: दीवार के socket से आने वाला AC (Alternating Current) को कंप्यूटर के लिए जरूरी DC (Direct Current) में convert करता है।
- Multiple Voltages Provide करता है:
- +12V → CPU, GPU, Fans, Drives
- +5V → USB Ports, पुरानी Logic Circuits
- +3.3V → RAM, Chipsets, SSDs
- Stable Power देता है ताकि system crash या hardware damage न हो।
Types of Computer Power Supplies
उपयोग के आधार पर:

- ATX Power Supply (Modern Desktop PCs के लिए Standard) Connectors: 24-pin motherboard, 8-pin CPU, PCIe, SATA, Molex Examples: Corsair CX550, Cooler Master MWE 650
- SFX Power Supply (Compact PCs के लिए) Same function, बस size छोटा होता है
- Server Power Supply High wattage और redundant setup (दो PSU एक साथ) Example: Dell/HP Server PSU
- Laptop Power Adapter (External) लैपटॉप के बाहर होता है, AC को DC में convert करता है Example: Dell 65W Charger
Technology के आधार पर:
- SMPS (Switched-Mode Power Supply) – Modern Efficient (~80–95%), हल्का और compact
- Linear Power Supply – पुराना और rare Heavy और inefficient, अब इस्तेमाल नहीं होता
Power Supply Connectors
Connector | काम |
24-pin ATX | Motherboard को power देता है |
4/8-pin EPS | CPU को power देता है |
6/8-pin PCIe | Graphics card को power देता है |
SATA Power | HDDs/SSDs |
Molex | Fans और पुराने drives |
Key Features to Look For
- Wattage (Power Output): 450W, 650W, 1000W (आपके PC के हिसाब से)
- Efficiency Rating: 80 Plus Bronze, Gold, Platinum (जितना high, उतना better)
- Modularity:
- Non-Modular → सारे cables fixed होते हैं
- Semi-Modular → कुछ cables detachable होते हैं
- Fully Modular → सारे cables detachable होते हैं
Symptoms of a Bad PSU
- कंप्यूटर randomly restart या shutdown होता है
- Power नहीं आता, motherboard LED नहीं जलता
- जलने की smell या buzzing noise आती है
- Voltage fluctuation से दूसरे parts damage हो सकते हैं
Technician’s Point of View से SMPS Repair Guide
SMPS के Main Sections

Input Stage (AC Side):
- EMI Filter & Varistor → Voltage spikes से protection
- Bridge Rectifier → AC को DC में convert करता है
- Primary Capacitors → High-voltage DC (~310V) store करते हैं
- PFC Circuit → Efficiency improve करता है
Switching Stage:
- PWM IC / Controller → Switching control करता है
- MOSFETs → DC को high-frequency AC में convert करते हैं
- High-Frequency Transformer → Voltage को step down करता है
Output Stage (DC Side):
- Schottky Diodes → AC को फिर से DC में convert करते हैं
- Output Capacitors → Voltage smooth करते हैं
- Inductors → Ripple कम करते हैं
Feedback & Protection:
- Optocoupler → Feedback देता है primary side को
- Supervisor IC → Over-voltage, over-current से protection देता है
Key Voltages in ATX SMPS
- +12V → CPU, GPU, Fans
- +5V → USB, Logic Circuits
- +3.3V → RAM, Chipsets
- -12V & 5VSB (Standby) → Motherboard standby और legacy devices
Note: PC बंद होने पर भी 5VSB active रहता है।
Repairing & Troubleshooting Process
Visual Inspection:
- जलने के निशान, bulged capacitors, broken solder joints
- Input fuse check करें – सबसे पहले उड़ता है
Primary Side Check:
- Fuse → Continuity test करें
- NTC & Varistor → Short तो नहीं?
- Bridge Rectifier → Short नहीं होना चाहिए
- Primary Capacitors → ESR meter से test करें
Secondary Side Check:
- Schottky Diodes → Shorted तो नहीं?
- Output Capacitors → फूले हुए तो नहीं?
Startup Test:
- Series bulb tester से power-up करें
- 5VSB check करें → PSU इसके बिना start नहीं होगा
- Green-to-Black jumper से PSU को बिना motherboard start करें
Measure Output Voltages:
- +12V, +5V, +3.3V → ±5% के अंदर होना चाहिए
- अगर fluctuation हो तो → PWM IC, optocoupler, feedback loop check करें
Common Faults in SMPS
Fault | Possible Reason |
No Power | Blown fuse, shorted MOSFET या bridge rectifier |
Fan Spins, No Output | Faulty PWM IC, open startup resistor |
PC Restarts | Dry/bulged capacitors, bad solder joints |
Voltage Fluctuation | Faulty optocoupler, bad secondary capacitor |
Safety Tips for Technicians
- Primary side में 310V DC रहता है → Capacitors को safely discharge करें
- Series bulb या variac से testing करें
- Multimeter और ESR meter हमेशा साथ रखें